Gaseous secondary electron detection and cascade amplification in the environmental scanning electron microscope

UTSePress Research/Manakin Repository

Search UTSePress Research


Advanced Search

Browse

My Account

Show simple item record

dc.contributor Morgan, Scott Warwick en_AU
dc.date.accessioned 2007-03-14T01:52:28Z
dc.date.accessioned 2012-12-15T03:52:50Z
dc.date.available 2007-03-14T01:52:28Z
dc.date.available 2012-12-15T03:52:50Z
dc.date.issued 2005
dc.identifier.uri http://hdl.handle.net/2100/242
dc.identifier.uri http://hdl.handle.net/10453/20227
dc.description University of Technology, Sydney. Faculty of Science. en_AU
dc.description.abstract This thesis quantitatively investigates gaseous electron-ion recombination in an environmental scanning electron microscope (ESEM) at a transient level by utilizing the dark shadows/streaks seen in gaseous secondary electron detector (GSED) images immediately after a region of enhanced secondary electron (SE) emission is encountered by a scanning electron beam. The investigation firstly derives a theoretical model of gaseous electron-ion recombination that takes into consideration transients caused by the time constant of the GSED electronics and external circuitry used to generate images. Experimental data of pixel intensity versus time of the streaks is then simulated using the model enabling the relative magnitudes of (i) ionization and recombination rates, (ii) recombination coefficients, and (iii) electron drift velocities, as well as absolute values of the total time constant of the detection system, to be determined as a function of microscope operating parameters. Results reveal the exact dependence that the effects of SE-ion recombination on signal formation have on reduced electric field intensity and time in ESEM. Furthermore, the model implicitly demonstrates that signal loss as a consequence of field retardation due to ion space charges, although obviously present, is not the foremost phenomenon causing streaking in images, as previously thought. Following that the generation and detection of gaseous scintillation and electro- luminescence produced via electron-gas molecule excitation reactions in ESEM is investigated. Here a novel gaseous scintillation detection (GSD) system is developed to efficiently detect photons produced. Images acquired using GSD are compared to those obtained using conventional GSED detection, and demonstrate that images rich in SE contrast can be achieved using such systems. A theoretical model is developed that describes the generation of photon signals by cascading SEs, high energy backscattered electrons (BSEs) and primary beam electrons (PEs). Photon amplification, or the total number of photons produced per sample emissive electron, is then investigated, and compared to conventional electronic amplification, over a wide range of microscope operating parameters, imaging gases and photon collection geometries. The main findings of the investigation revealed that detected electroluminescent signals exhibit larger SE signal-to-background levels than that of conventional electronic signals detected via GSED. Also, dragging the electron cascade towards the light pipe assemblage of GSD systems, or electrostatic focusing, dramatically increases photon collection efficiencies. The attainment of such an improvement being a direct consequence of increasing the `effective' solid angle for photon collection. Finally, in attempt to characterize the scintillating wavelengths arising from sample emissive SEs, PEs, BSEs, and their respective cascaded electrons, such that future photon filtering techniques can be employed to extract nominated GSD imaging signals, the emission spectra of commonly utilized electroluminescent gases in ESEM, such as argon (Ar) and nitrogen (N2), were collected and investigated. Spectra of Ar and N2 reveal several major emission lines that occur in the ultraviolet (UV) to near infrared (NIR) regions of the electromagnetic spectrum. The major photon emissions discovered in Ar are attributed to occur via atomic de-excitation transitions of neutral Ar (Ar I), whilst for N2, major emissions are attributed to be a consequence of second positive band vibrational de-excitation reactions. Major wavelength intensity versus gas pressure data, for both Ar and N2, illustrate that wavelength intensities increase with decreasing pressure. This phenomenon strongly suggesting that quenching effects and reductions in excitation mean free paths increase with imaging gas pressure. en_AU
dc.format.extent 130117 bytes
dc.format.extent 1568913 bytes
dc.format.extent 707926 bytes
dc.format.extent 224769 bytes
dc.format.extent 2588109 bytes
dc.format.extent 591967 bytes
dc.format.extent 338895 bytes
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.format.mimetype application/pdf
dc.language en en_AU
dc.language.iso en_AU
dc.rights http://www.lib.uts.edu.au/disclaimer.html en_AU
dc.rights Copyright Scott Warwick Morgan en_AU
dc.subject Electron microscope. en_AU
dc.subject Scanning. en_AU
dc.subject Cascade. en_AU
dc.subject Signal loss. en_AU
dc.subject Gaseous. en_AU
dc.title Gaseous secondary electron detection and cascade amplification in the environmental scanning electron microscope en_AU
dc.type Thesis (PhD) en_AU


Files in this item

This item appears in the following Collection(s)

Show simple item record