Issues of construction health and safety in developing countries: a case of Jordan

Suhair Zaid Alkilani, Julie Jupp, Anil Sawhney


The construction industry is widely regarded as one of the most significant interms of its impact on health and safety (H&S). Recent findings suggestthat in developing countries H&S awareness and performance is low. In this paper,the current state of H&S on construction sites in Jordan was explored usinga two-part investigation. The first part introduces the area of research in aliterature based study of on-site safety. The second part is a case study onthe Jordanian construction industry and its current H&S practices. Primary datawas collected from field visits, expert interviews and semi-structuredquestionnaires. Supporting secondary data was collected from archival studiesand related research literature. The research findings highlight a lack of governmentcommitment exemplified by regulations, policies and legal constraints thatlimit the operational efficiency of those government departments responsiblefor H&S management, and hindering the development of good H&S practice.Research results also highlight the key constraints of good H&S practice fromthe perspective of construction contractors.The study concludes with discussion ofpotential solutions toimprove H&S performance on construction sites in Jordan.

Full Text



Abdelhamid, T. S. and Everett, J. G. 2000. Identifying root causes of construction accidents. Journal of Construction Engineering & Management, 126 (1), 52.

Agyem-Bediako, S. F., 2007. Management commitment to safety among multinational construction companies in developing countries: A case of Ghana. 3260116 (Sc.D.). University of Massachusetts Lowell.

Alkilani, S., Jupp, J. and Sawhney, A., 2012a. Promoting Health and Safety in Construction in Developing Countries: A Case of Jordan. CIB W099 International Conference on Modeling & Building Health & Safety. Singapore.

Alkilani, S., Jupp, J. and Sawhney, A., 2012b. Readying a Developing Economy for National Performance Measurement and Benchmarking: A Case Study of the Jordanian Construction Industry. Visions for the future of housing: Mega cities. Turkey: IIAHS World Congress on Housing.

Bowen, P., Tookey, J. and Hardcastle, C., 2002. Construction Procurement and Management in the UK & South Africa. 10th Symposium Construction Innovation and Global Competitiveness. CRC Press, 476-497.

Charles, C. 2007. Construction Safety anf Health Factors at the Industry Level: The Case of Singapore. Journal of Construction in Developing Counreies, 12 (2).

Charles, M., Pillay, J. and Ryan, R., 2007. Guide to Best Practice for Safer Construction: Literature Review from Concept to Completion. Australia: Cooperative Research Centre for Construction Innovation.

Chi, C.-F., Chang, T.-C. and Ting, H.-I. 2005. Accident Patterns and Prevention Measures for Fatal Occupational Falls in the Construction Industry. Applied Ergonomics, 36 (4), 391-400.

Chileshe, N. and Dzisi, E. 2012. Benefts and Barriers of Construction Health and Safety Management (HSM): Perception of Practioners within Design Organisations. HJournal of Engineering, Design and Technology, 10 (2).

Chiocha, C., Smallwood, J. and Emuze, F. 2011. Health and Safety in the Malawian Construction Industry. Acta Structilia, 18 (1).

Colin, F. 1999. Benchmarking Health and Safety Performance Through Company Safety Competitions. Benchmarking: An International Journal, 6 (4), 325-337.

DOL, 2010. A principal's guide to contracting to meet the Health and Safety in Employment Act 1992. NZ.: Department of Labour.

EASHW, 2013. The European Agency for Safety and Health at Work (EU-OSHA) [online]. EU. Member States. Available from:

El-Mashaleh, M., et al. 2010. Safety Management in the Jordanian Construction Industry. Journal of Civil Engineering, 4 (1).

Fang, D. P., Huang, X. Y. and Hinze, J. 2004. Benchmarking Studies on Construction Safety Management in China. Journal of Construction Engineering & Management, 130 (3), 424-432.

Farooqui, R., Arif, F. and Rafeeqi, S. F., Safety Performance in Construction Industry of Pakistan. ed. First International Conference on Construction in Developing Countries, 2008 Karachi, Pakistan.

Gibb, A. and Bust, P., 2006. Construction healtha and safety in developing countries. UK: European Construction Institute.

Hamalainen, P. i., Takala, J. and Leena Saarela, K. 2007. Global Estimates of Occupational Accidents. Safety Science, 44 (16), 137-156.

Hinze, J., Coble, R. J. and Haupt, T. C., 2000. The Management of Construction Safety and Health. Rotterdam ; Brookfield, VT: A.A. Balkema.

Hinze, J. and Wilson, G. 2000. Moving Toward A Zero Injury Objective. Journal of Construction Engineering & Management, 126 (5), 399.

Idoro, G. 2011. Comparing Occupatioal Health and Safety (OHS) Management Efforts and Ferformance of Nigerian Construction Contractors Journal of Construction in Developing Counreies, 16 (2), 151-173.

ILO, 1992. Health and safety in construction, an ILO code of practice. Geneva, International Labor Office, report no, 08.10.1.

ILO., 2010. The Role of Worker Representation and Consultation in Managing Health and Safety in the Construction Industry. Geneva.

Jannadi, O. A. and Bu-Khamsin, M. S. 2002. Safety factors considered by industrial contractors in Saudi Arabia. Building and Environment, 37 (5), 539-547.

Jaselskis, E. J., Anderson, S. D. and Russell, J. S. 1996. Strategies for Achieving Excellence in Construction Safety Performance. Journal of Construction Engineering & Management, 122 (1), 61.

JCCA, 2012. The Current Status of Construction Sector in Jordan. Amman: Jordanian Construction Contractors Association

JDOS, 2010. Jordanian Construction Sector Statistical Survey 2008-2009. Amman: Jordanian Department of Statistics.

JEDCO, 2011. SME Development in Jordan [online]. Jordan: Jordan Enterprise Development Corporation. Available from:

Jill, W. and John, H., 2010. Promoting Construction Health and Safety through Procurement: A briefing note for developing countries. Institution of Civil Engineers

John, L. and Anthony, M. 2001. Measuring the occupational health and safety performance of construction companies in Australia. Facilities, 19 (3), 131-139.

Kartam, N. A., Flood, I. and Koushki, P. 2000. Construction Safety in Kuwait: Issues, Procedures, Problems, and Recommendations. Safety Science, 36 (3), 163-184.

Kheni, N., Gibb, A. and Dainty, A., The Management of Construction Site Health and Safety by Small and Medium-Sized Construction Businesses in Developing Countries: A Ghana Case Study. ed. 22nd Annual ARCOM Conference, 2006 Birmingham. UK, 295-304.

Koehn, E. E., Kothari, R. K. and Pan, C.-S. 1995. Safety in Developing Countries: Professional and Bureaucratic Problems. Journal of Construction Engineering & Management, 121 (3), 261.

Kometa, S. T., Olomolaiye, P. O. and Harris, F. C. 1994. Attributes of UK construction clients influencing project consultants' performance. Construction Management & Economics, 12 (5), 433.

Konkolewsky, H.-H., 2004. Actions to Improve Safety and health in Construction. Magazine of the European agency fro safety and Health at work. Belgium.

Larcher, P. and Sohail, M., 1999. Review of safety in construction and operation for the WS & S secto: part 1. London. UK.: London school of hygiene and tropicla medicine, UK.

Levitt, R. E. 1976. Reducing Construction Accidents-Top management's Role. Journal of the constrcution Division, 102 (3), 465-478.

MOL, 2010. Anual report. [online]. Amman. Jordan: Ministry of Labour. Available from:

Murie, F. 2007. Building Safety-an International Perspective. International Journal of Occupational and Environmental Health, 13 (1), 5-11.

NEBOSH, 2013. The National Examination Board in Occupational Safety and Health [online]. UK. Available from:

NIOSH, 2012. The National Institute for Occupational Safety and Health [online]. Washington, D.C. US. Available from:

Ofori, G. 2001. Indicators for measuring construction industry development in developing countries. Building Research & Information, 29 (1), 40 - 50.

Ofori, G., 2011. New perspectives on construction in developing countries. Abingdon, Oxon ; New York: Spon Press.

Paivi, H., Jukka, T. and leena, S. K. 2006. Global etimates of occupational accidents. Safety Science, 44, 37-156.

Petrovoc-Lazarevic, S. and Perry, M., 2004. Occupational Health and Safety Shortcomings in the Australian Construction Industry.

Scotney, V., 2000. Development of Health and Safety Perfromance Measurement Tool. UK: Health and Safety Excutive, report no, 309/2000.

Teo, E. A. L., Haupt, T. and Feng, Y., 2008. Construction Health and Safet Performance in Developing and Developed Countries: A Parallel Study in South Africa and Singapore. CIB W99 International Conference. Gainesville, Florida, 485-499.

Toole, T. M. 2002. Construction Site Safety Roles. Journal of Construction Engineering & Management, 128 (3), 203.

UNESCO, 2010. Measuring R & D: Challenges Faced by Developing Countries.: UNESCO Institute for Statistics.

Weil, D. 2001. Assessing OSHA Performance: New Evidence from the Construction Industry. Journal of Policy Analysis & Management, 20 (4), 651-674.

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM