The use of cloud enabled building information models – an expert analysis
The dependency of today’s construction professionals to use singular commercial applications for design possibilities creates the risk of being dictated by the language-tools they use. This unknowingly approach to converting to the constraints of a particular computer application’s style, reduces one’s association with cutting-edge design as no single computer application can support all of the tasks associated with building-design and production. Interoperability depicts the need to pass data between applications, allowing multiple types of experts and applications to contribute to the work at hand. Cloud computing is a centralized heterogeneous platform that enables different applications to be connected to each other through using remote data servers. However, the possibility of providing an interoperable process based on binding several construction applications through a single repository platform ‘cloud computing’ required further analysis. The following Delphi questionnaires analysed the exchanging information opportunities of Building Information Modelling (BIM) as the possible solution for the integration of applications on a cloud platform. The survey structure is modelled to; (i) identify the most appropriate applications for advancing interoperability at the early design stage, (ii) detect the most severe barriers of BIM implementation from a business and legal viewpoint, (iii) examine the need for standards to address information exchange between design team, and (iv) explore the use of the most common interfaces for exchanging information. The anticipated findings will assist in identifying a model that will enhance the standardized passing of information between systems at the feasibility design stage of a construction project.
Armbrust, M., Fox, A., Griffith, R., Joseph, A.D., Katz, R.H., Konwinski, A., Lee, G., Patterson, D.A, Rabkin, A., Stocia, I. and Zaharia, M. (2009) 'Above the Clouds.'A Berkeley View of Cloud Computing, Electrical Engineering and Computer Sciences University of California at Berkeley.
Cisco and Jonhson Controls. (2008) 'Building Automation System over IP (BAS/IP)', Design and Implementation Guide, www.cisco.com/go/validateddesigns, Cisco Validated Design. V8.1
Hecht, L. (2008) 'A Sustainable Building Industry Requires Service-Based BIM', V1 Magazine, Promoting Spatial Design for a Sustainable Tomorrow, http://www.vector1media.com/
Hecht, L. Jr and Singh, R. (2010) 'Summary of the Architecture, Engineering, Construction, Owner Operator Phase 1 (AECOO-1) Joint Testbed', buildingSMART alliance (bSa) and The Open Geospatial Consortium, Inc. (OGC), http://portal.opengeospatial.org, Discussion Document
Kagioglou, M., Cooper, R. and Aouad, G. (1999) 'Re-Engineering the UK Construction Industry: The Process Protocol', Proceedings of the Second International Conference on Construction Process Re-Engineering (CPR-99), 12-13 July, University of New south Wales, Sydney Australia
Lowe, S (2010) 'Five Challenges for moving backup to the Cloud', TechRepublic, http://www.techrepublic.com/blog/datacenter/five-challenges-for-moving-back-up-to-the-cloud/2618, 23/06/2010
Ramanujam, B. (2007) 'Moving SaaS/On-Demand from Dream to Successful Reality', A Practical Solution to Real-World Problems with Contact Centre Adoption SaaS/On Demand, http://www.cypcorp.com/leadership/ index.php
Redmond, A., Hore, A.V., West, R.P. and Alshawi, M. (2010) 'Building Support for Cloud Computing in the Irish Construction Industry', Proceeding CIB W78 2010, 27th International Conference, 16-18 November, Cairo, Eygpt
Sebastian, R. (2010) 'Breaking through Business and Legal Barriers of Open Collaborative Process based on Building Information Modelling (BIM)', Accepted paper for Proceedings of CIB World Congress, 10-14 May 2010, Salford Quays, UK
Smith, D. (2007) 'An Introduction to Building Information Modeling (BIM)', Journal of Building Information Modeling, An official publication of the National BIM Standard (NBIMS) and the National Institute of Building Sciences (NIBS), 17, 12-14
Weinsten, B.D. (1993) 'What is an Expert?', Theoretical Medicine and Bioethics, 14 (1), 57-73, http://dx.doi.org/10.1007/BF00993988
Wohl, A. (2008) 'Succeeding at SaaS: Computing in the Cloud', Published by Wohl Associates
Metrics powered by PLOS ALM