CH2 Energy Harvesting Systems: Economic Use and Efficiency
ABARE (1999), Australian Energy Consumption and Production, Australian Bureau of Agricultural and Resource Economics, Canberra.
Action Energy (2003), 'Energy Consumption Guide 19 Energy Use in Office', www.actionenergy.org.uk null
3 AEC (2003a), Technical Design and Overview + Building Services Philosophy, Advanced Environmental Concepts Pty Ltd., Sydney."
AEC (2003b), Passive Design Report, Advanced Environmental Concepts Pty Ltd, Sydney.
AEC (2003c), Cooling Load Reduction Through use of TRT monitors, Advanced Environmental Concepts Pty Ltd., Sydney.
AEC (2003d), Aircond Design Strategy, Advanced Environmental Concepts Pty Ltd ., Sydney.
AEC (2003e), Design Development Report, Advanced Environmental Concepts Pty Ltd, Sydney.
AEC (2003f), PCM Operational Report, Advanced Environmental Concepts Pty Ltd, Sydney.
AEC (2003g), Renewable Energy Report -Solar, Advanced Environmental Concepts Pty Ltd, Sydney.
AEC (2004a), Revised Building Energy Consumption, Advanced Environmental Concepts Pty Ltd, Sydney.
AEC (2004b), Independent Commissioning Brief, Advanced Environmental Concepts Pty Ltd, Sydney.
AGO (2003), Renewable Energy Commercialisation in Australia, Australian Greenhouse Office, Canberra.
Architects' Council of Europe (1999), A Green Vitruvius -Principles and Practice of Sustainable Architectural Design, James & James Ltd, London.
ASHRAE (1992), ANSIIASHRAE Standard 55-1992, Thermal Environmental Conditions for Human Occupancy, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta.
ASHRAE (2001), ASHRAE Standard 90.1-2001, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta.
Beltran L.O., Lee E.S. and Selkowitz S.E. (1996), 'Advanced Optical Daylighting Systems: Light Shelves and Light Pipes', in proceedings of the 19961ESNAAnnual Conference, Cleveland.
Bordass, B., Cohen, R. and Field, J. (2004), Energy Performance of Non-Domestic Buildings: Closing the Credibility Gap, Building Performance Congress, London.
BOMA (1994), Energy Guidelines 1994, Victorian Division of Building Owners and Managers Association, Melbourne.
Capeluto, I.G. (2003), The influence of the urban environment on the availability of the daylighting in office buildings in Israel', Building and Environment, vo1.38, pp.752-754.
CBCES (2000), 1999 Commercial Buildings Energy Consumption Survey, Energy Information Administration.
CDM (2002), 'Consultancy Study on the Development of Energy Consumption Indicators and Benchmarks for Selected Energy-consuming Groups in Hong Kong', EMSD, Hong Kong, http://www.emsd.gov.hk/emsd/e_download/pee/esab.pdf.
Chen, Z.D. and Bandopadhayay P. (2001), 'Solar Chimney-Current Understanding and Future Researches', Natural and Hybrid Ventilation Workshop, CSIRO, Melbourne.
CoM (2004), Council House 2: Stories and Lessons from the CH2 Project, City of Melbourne Council, Melbourne.
de Dear R.J. and Brager G.S. (2002), 'Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55', Energy and Buildings. vo1.34, no.6, pp.549-561. http://dx.doi.org/10.1016/S0378-7788(02)00005-1
Dieckmann, J, Roth, K.w. and Brodrick, J. (2004), 'Radiant ceiling cooling ', ASHRAE Journal, vo1.46, nol.6, pp.42-43.
EMET (1999), Baseline Study of Greenhouse Gas Emissions from the Commercial Buildings Sector, EMET Consultants and Solarch Group, Canberra.
Facâo, J. and Oliveira A.C. (2000), Thermal behaviour of closed wet cooling towers for use with chilled ceilings', Applied Thermal Engineering, vo1.20, pp.1225-1236.
Fanger, P.O., (1970). Thermal comfort -Analysis and Applications in environmental engineering. McGraw Hill. New York.
FOBRP (2001), Guideline for Sustainable Building, Federal Office for Building and Regional Planning, Germany.
Givoni, B. (1974), Man, Climate and Architecture, 2nd. edition, Van Nostrand Reinhold, New York.
Hamilton, S.D., Roth, K.w. and Brodrick, J. (2004), 'Displacement ventilation ', ASHRAE Journal, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta, vo1.46, no.9, pp.56-58.
Hennessy, S. (2004), 'Making Energy Ratings Work', Property Council Australia, http://propertycouncil.gravitymax.com.au/natJpage.asp?622=267236 & E_Page=17720.
lEA Annex 28 (1995), Review of Low Energy Cooling Technologies, International Energy Agency, London.
ISO (1994), ISO 7730, Moderate thermal environmentsdetermination of the PMV and PPD indices and specification of the conditions for thermal comfort, ISO, Geneva.
Jain, S., Dhar, P.L., Kaushik, S.C. (1995), 'Evaluation of solid desiccant based evaporative cooling cycles for typical hot and humid climate', International Journal of Refrigeration, vo1.18, no.5, pp.287-296. http://dx.doi.org/10.1016/0140-7007(95)00016-5
Lawson, B.I. (1996), Building Materials Energy and the Environment, The Royal Australian Institute of Architects, ACT.
Lechner, N. (2001), Heating, Cooling, Lighting: Design Methods for Architects, 2nd. edition, John Wiley, New York.
Leslie, R.P., (2003), 'Capturing the daylight dividend in buildings: why and how?', Building and Environment, vo1.38, pp.381-385. http://dx.doi.org/10.1016/S0360-1323(02)00118-X
LSA (2003), Design Development Summary VCML2502BOO2 AR30509, Lincolne Scott Australia Pty Ltd, Melbourne.
Luther, M., Cheung, C.K. (2003), 'High Performance LowEnergy Buildings', in proceedings of the 1996 ANZSES Annual Conference, Melbourne.
Mei, Li., Infield, D., Eicker, U. and Fux, V. (2003), 'Thermal modelling of a building with an integrated ventilated PV fayade', Energy and Buildings, vo1.35, pp.605-617. http://dx.doi.org/10.1016/S0378-7788(02)00168-8
PCA (1997), Victorian Energy Use Survey, Property Council of Australia Victorian Division, Melbourne.
PCA (2001), Property Council ofAustralia Energy Guidelines, Property Council of Australia Limited, Brisbane.
Pears, A. (2004), Energy Efficiency -Its Potential: Some Perspectives and Experience, Background Paper for International Energy Agency Energy Efficiency Workshop, Paris.
Rating Energy Performance, Office Buildings, http://eber.ed.ornl.gov/benchmarkloff.htm.
SEAV (2000), Energy Smart Building Design, Sustainable Energy Authority Victoria, Melbourne.
SEAV (2001), Energy Efficient Government Buildings, Sustainable Energy Authority Victoria, Melbourne.
SEDA (2004), ABGR Validation Protocol for Computer Simulations, ABGR National Administrator, Sydney.
Steele, J. (1997), Sustainable Architecture: Principles, Paradigms, and Case Studies, McGraw-Hill, New York.
Sweetser, R. (2000), 'Absorption Technologies for Buildings: Cooling, Heating, and Power (BCHP) System', Heating!Piping! AirConditioning Engineering, New York. pp.51-56.
Szokolay, SV (1995), Thermal Design of Buildings, The Royal Australian Institute of Architects, ACT.
TIAX (2002), 'Energy consumption characteristics of commercial building HVAC systems -Volume III : energy savings potential', Final Report to US Department of Energy, Office of Building Technology, July, www.tiax.bizlaboutus/pdfs/HVAC3-FinaIReport.pdf.
L (2004), http://www.60Igreenbuilding.com. Australia Conservation Foundation.